RO Water Unit
▲ Function
The water purify unit is a necessary equipment for the hemodialysis therapy.It adopts the
worldclass inverseinfiltration membrane with an impurity reduction rate of up to 99.4%. and
it is made of the softener,active carbon,inverse infiltration,water tank,accessories,etc.even
one front filter is equipped to facilitate automatic inverse washing and regeneration.
▲ Specification:
◆ Multiple filteration core (deep filter core,rolling filter core,etc.)
with best pollution prevention and filtration
◆ The water purify unit combines the softener,active carbon,inverse infiltration,water tank
and accessories into realize integration and standardization.
◆ P1C automation,The water purify unit applies the stabilizing pump,fully automatic recoil
softening device and regenerating device.
◆ The water purify unit is accessible to the hemodialysis unit to facilitate sterilization.
◆ The water purify unit adopts muti-level sterilization.
◆ Multiple materials were supplied which is easy to clean and regeneration.
◆ Our company acts as an agent of all kinds of import,homemade water purify,With the
strong technical strength to establish the center of hemodialysis,we could efficiently supply
the after service of water purify unit as Installation,machine testing and maintenance.
▲ Process introduction:
The pretreatment device of system is equipped with sand filter,carbon filter,softener.The sand filter
is mainly used for removing granule impurity and big molecule organic compound,humic
acid and other colloid.Carbon filter is mainly used for absorbing small molecule organic
compound. Softener is mainly used for softening water by replacing Ca+ Ma+ from water.
The original water reach quality standard of RO water after pretreatment by three classed.
the RO inverseinfiltration membrane adopts importbrands compound membrane with a salt
reduction rate of up to 99.5% and up to 9799% for the whole machine, which can reduce
bacteria,virus thermal source impurity.The sterilization of U.V and 0.2 u precision
filter assure water with non bacterial.With Automatic PLC,the water purity is equipped with
multilayer protraction device which is easy to operate safely.
▲ Main Technical parameter:
◆ Input water requirement
- The original water is tap water which pressure≥0.20MPa,
- Conductivity≤300mS/cm,and the water quality should accord with GB57492.
◆ Water standard
- PH:5.5-7.5
- Copper:≤0.1mg per L
- Cond.≤10mS per cm
- Chloride:≤0.1mg per L
- Cyanide≤0.001mg per L
- Lead≤0.005mg per L
◆ The best pressure of RO:0.8-1.2MPa
◆ The max.pressure of RO:1.4MPa
◆ Water output(25℃):150L per H,250Lper H,500L per H,1T per H,2T per H
Reviews
There are no reviews yet.